High Performance & High Efficiency.

Application:

The Nitrogen gas was apply in the tyre inflation of truck, bus, passenger car and motorcycle popularly.






It was many advantages as following:

1. Suitable to set up at the tyre shops, tyre service centers and petrol service station.

2. Extend the tyre life due to reduce friction when run it

3. The tyre pressure was stable when drive it on the road.

Performance of automatics:

The tyre filled Nitrogen gas to reduce

Vibration when driving on lumpy road.

Also reinforced stable and lower noise.

Operation safety:

1. The Nitrogen gas in tyre will not caused puncture due to heat.

2. The tyre pressure was change less and keep tyre air to be stability.

Cost saving:

Increase the life of tyre and wheel rim. Nitrogen gas can reduce friction and cut down fuel cost.

Environment benefit:

Extend the tyre life and reduce the fuel consumption then energy saving.

Specification:

Comfortable and human-based inter-face.

Feature:

1) Electronically controlled driver system .

2) Energy saving and environmentally friendly . 

3) Stable , safe & reliable to operate . 

4) Easy to learn and simple to operate .

5) Matching more range of tire sizes . 

6) Ergonomic to use .

Specification:

ADVANTAGE:
1. The lay-out of driver parts in inside spacious room was succinctness which is in favor of maintenance.
2. The air blaster was made of very durable material.
3. Tire changer was also suitable for Run-flat tire (RSC).

Advantage:
1. The lay-out of driver parts in inside spacious room was succinctness which is in favor of maintenance.
2. The air blaster was made of very durable material.
3. Tire changer was also suitable for Run-flat tire (RSC).

4. Model no.713e was popular without air blaster.
5. The motor drives the gearbox directly to the turntable without belt.
6. Colour will be red, yellow, black and blue available depending on the minimum order quantity.

Specification:

ADVANTAGE:
1. The lay-out of driver parts in inside spacious room was succinctness which is in favor of maintenance.
2. The air blaster was made of very durable material.
3. Tire changer was also suitable for Run-flat tire (RSC).

SPECIFICATION:
Bead Breaker Cylinder Power: 2,700 kg
Working Pressure: 8 - 8.5 kg
1-Phase Electric Motor: 220V 50/60Hz 1Hp
Max Wheel Diameter: 1120 mm
Max Wheel Width: 370 mm
It handles Wheels From 12” - 24”
External Clamping: 12” - 22”
Internal Clamping: 14” - 24”
Net Weight: 300 kg
Gross Weight: 320 kg
Packing Dimensions (LxWxH): 1,000 x 980 x 1,150 mm

Microprocessor based with self-calibration and self-diagnostic capabilities.

Advantage: Excellent and accurate balance detection unit，Very stable control unit.

SPECIFICATIONS:
Input voltage: Single phase 220V/50 or 60 Hz
Motor power: 2 HP
Max wheel diameter: 140cm
Wheel balancing speed: 200 rpm
Max wheel width: 1.5-22”
Readout accuracy: 1 gram
Max wheel weight: 65kg
Weight: 110kg
Measure time: 6 sec
Dimension: 680*110*880 (tire safe case = 1650)

Specification:

F7193: The lift was screw drive system which was simple structure and safety more.

Wheel balancing weight plier

Item No. F300

Material:  Alloy steel CR-V.& S45C

Application: Suitable for wheel rim to hook on or release the balance weight.

Application: Suitable for wheel to adjust the balance weight to travel along a route of vehicles etc.

Description:  5g x 12 pcs

Thickness: 3mm

Temperature range from -40℃ to 80℃

No. F2711C Stick backed PVC film sheet

No. F2711R Stick backed releasing paper

Description:  5g x 4 pcs + 10g x 4 pcs

Thickness: 3mm

Temperature range from -40℃ to 80℃

No. F2712C Stick backed PVC film sheet

No. F2712R Stick backed releasing paper